Applications: Low Frequency Dynamic Strain, Pyroelectric Signals, Audio-band and Acoustic Signals, Machine Vibration, Piezo Cable and Traffic Sensor Interface

　　Industries: General Industry, Consumer Goods

　　Description: The Piezo Film Lab Amplifier is a versatile preamplifier for use with Piezoelectric sensors. The electric signal from the piezo film is generated within the electrodes of a capacitor. It is important to arrange an input that controls the rate of charge leakage appropriately for the application. Simply connecting a piezo film element to the input of an oscilloscope will usually create a high-pass filter that removes any low frequency content of the original piezo signal, and this can lead to disappointment or incorrect evaluation of the material's true potential. This has led MEAS to develop a new low-cost Piezo Film Lab Amp, specifically aimed at developers and engineers exploring the material. Both first-time users and seasoned professionals will benefit from the wide range of sensitivity adjustment in either voltage or charge modes, and the functionality of the high- and low-pass filters.

　　Features:

　　Charge or Voltage Mode Operation
　　BNC Input and Output
　　0.01 to 1000 mV/pC Sensitivity Range in Charge Mode
　　1M to 1G Input Resistance, -40 to 40dB Gain in Voltage Mode
　　Multi-Pole, Low-Pass and High-Pass Filtering with -3dB Frequencies Ranging from 0.1Hz to 100kHz
　　Internal Battery (2 x 9V) or external 24VDC Power Supply Operation
　　Wide Dynamic Range
　　Response to 0.1Hz
　　Active HP and LP Filters

　　典型應用: 低頻動態應變，熱電信號，音頻波段及聲信號，機械振動，壓電電纜及交通傳感器接口

　　行業: 工業控制, 消費電子和家用電器

　　產品描述:

　　壓電薄膜實驗室放大器是一種適用于壓電傳感器的萬能前置放大器。壓電薄膜的電信號由電容的電極產生。準備一個輸入源來合理控制電荷的流失比率是非常重要的。簡單地連接壓電薄膜元件到示波器的輸入端通常會產生一個高通濾波器，將原始壓電信號的低頻內容全部濾除，這可能會導致材料的錯誤評估和使用。 因此MEAS研發了一種新的低成本壓電薄膜實驗室放大器，為研發工程師探索研究材料提供方便。放大器電壓和電荷模式下的寬靈敏度調節范圍，和高/低通濾波器功能對初次使用者和經驗豐富的專業人士都有幫助。

　　特點:

　　電荷或電壓模式操作
　　BNC輸入和輸出
　　電荷模式下靈敏度范圍：0.01~1000mV/pC
　　輸入電阻：1M ~ 1G，電壓模式增益：-40 ~ 40dB
　　多極點，低通/高通濾波器，-3dB頻率范圍：0.1Hz ~ 100kHz
　　內置電池（2×9V）或24VDC外部電源供電
　　寬動態范圍 
　　動態HP和LP濾波器
　　
　　壓電薄膜實驗室放大器更多技術參數及規格書下載請瀏覽：http://m.fineinshow.com/sensors/616.html

　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。